Deskripsi
Fusion Splicer Ilsintech Swift KR7 is the advanced typical ribbon splicer that can proceed the maintenance via internet.And it can take user-friendly GUI for user convenience.
BENEFITS AND FEATURES Of Fusion Splicer Ilsintech Swift KR7
- Internet remote access maintenance
- User friendly GUI
- Resistance to Shock, Dust and Water
▶ The splicer with high reliability has stable performance even in a harsh environment | Shock-Free Fall : 76cm from 5 sides l Waterproof : IPx2 l Dustproof : IP5x
- Powerful Lithium Polymer Battery with Large Capacity
Performs 200 cycles of fusion splicing and sleeve heating with the standard battery
- 4.3-inch Color LCD Monitor with Touch Screen
▶ Magnification : 20X, MAX 55X
▶ For user’s convenience, LCD monitor has been designed with touch screen in addition to the operation keys.
- Bidirectional Operation System
▶ For user’s ergonomic preference, the screen can be turned around for one’s chosen viewing direction.
- Equipped with Sleeve Loader to Prevent Contamination and to Provide Convenience
▶ While working in a manhole, the loader prevents the supplementary sleeve from falling and being contaminated.
▶ Working in aerial space such as telephone pole, the loader also prevents the supplementary sleeve from falling down.
- Built-in Dual Sleeve Heater
▶ Productivity would be increased up to 30% due to a simple & user-friendly design.
▶ The dual-heater can work for both Fiber to Fiber and Fiber to Swift Connector.
- Auto-Calibration
▶ Detects the surrounding environment of temperature, humidity, air pressure and measures discharge calibration rate automatically.
Specifications Ilsintech Swift KR7
Category | Description |
Fiber alignment |
Fixed V-Groove(Clad to Clad) |
Applicable type of fibers |
SM(ITU-T G.652), MM(ITU-T G.651), DS(ITU-T G.653), NZDS(ITU-T G.655) |
Fiber count |
Single fiber, 2~12 fiber |
Applicable fiber dimensions |
Single: Cladding diameter 125μm, Coating diameter 250, 900μm Ribbon: Cladding diameter 125μm, Ribbon fiber thickness 0.25 to 0.40mm |
Fiber setting and cleaved length |
0.40in |
Splicing modes |
Splice mode: 100, Heat mode: 100 |
Typical splice loss |
SM: 0.05dB, MM: 0.02dB, DS: 0.08dB, NZDS: 0.08dB
|
Return Loss |
> 60dB |
Splicing Time |
Typical 16sec with standard SM(ITU-T G.652) |
Splice loss estimate |
Available |
Sleeve heating time |
1~2 core 20sec, 4~12 core 50sec |
Applicable protection sleeve |
1.6in, 2.4in(fiber), Micro |
Storage of splice result |
The last 10,000 results to be stored in the internal memory.(Image 10,000 results) |
Tension test |
2N |
Operating condition |
Altitude: 5,000m above sea level, Temperature: -14°F~122°F, Humidity: 0~95%, Wind: 15m/s, non-condensing, dust proof, water proof, shock proof |
Storage condition |
Temperature: -40°F~176°F, Humidity: 0~95% |
Dimension |
5.6(W) x 6.4(L) x 5.7(H)in (Including rubber) |
Weight |
4.4Ib(Including battery 5.5Ib) |
Viewing method and display |
Two CMOS cameras and 4.3-inch color LCD monitor with touch screen |
Fiber view and magnification |
20X, MAX 55X |
Power supply |
DC Lithium polymer battery(DC 14.8V, 6000mAh), 100~240V AC Adapter |
No. of splice cycles with battery |
200cycle |
Electrode life |
More than 1,500 times |
Terminals |
USB, External Power (DC 12V Available for car cigar jack) DC Output 13.2~16.8V |
Product Includes
(1) Fusion Splicer
(1) AC Adapter
(2) Sleeve Loader
(1) Spare Electrode
(1) Battery Pack
(1) Alcohol Dispenser
(1) Cooling Tray
(1) Holder
(1) Manual Stripper (DC)
(1) Cleaver
(1) DC-Output Cable
(1) Tool Box
(1) User Manual
(1) Carrying Case
Ulasan
Belum ada ulasan.