Description
Repeater Icom IC-FR5200H 50W Analog dan Digital
50W 100% Duty Cycle Operation
Employing a high performance power amplifier, together with the solid heatsink built into the chassis, the IC-FR5200H series provides a reliable 100% duty cycle operation at 50W output.
IDAS, Analog FM and Mixed Mode
The IC-FR5200H series is compatible with both analog FM mode and IDAS conventional and NXDN™ Type-D trunking* mode. Program digital and/or analog FM modes per channel. The mixed mode operation allows you to receive both analog FM and IDAS conventional modes and to transmit either mode depending on the received signal.
* Type-D Trunking and network controller functions are not available, depending on version.
32 Channel Capacity and 5 Programmable Buttons
The 12-digit dot-matrix display, 5 programmable buttons, 32 memory channels and internal speaker allow you to use the repeater as a simple base station or to check repeater activity. LEDs on the front panel show channel conditions.
Built-in Type-D Trunking and Network Controller*
The Type-D multi-site trunking/conventional functions are integrated in the repeater. The IP network capability extends your communication coverage and allows you to remotely control the repeater settings.
* Type-D Trunking and network controller functions are not available, depending on version.
D-SUB 25-pin Accessory Connector
Repeater Icom IC-FR5200H series has a programmable D-SUB 25-pin accessory connector for connecting external remote control devices. Also, modulation/demodulation signals can be input/output from the D-SUB connector.
Multiple CTCSS, DTCS Tone and RAN Code Decode
Repeater Icom IC-FR5200H series decodes multiple CTCSS and DTCS as well as digital RAN (Radio Access Number) codes on a per channel basis (up to 16 tones/codes) and downlinks the received signal with a specified tone/code. This function is useful for sharing a channel with multiple groups.
Other features
- CW ID transmission
- ±0.5ppm high frequency stability (Digital mode)
- 2U low profile for 19-inch rack mount
- Digital voice scrambler provides 15-bit key (about 32,000 codes)
- Built-in inversion voice scrambler (Analog mode)
- Built-in audio compander (Analog mode)
- PTT priority setting (Local Mic., external PTT or repeater operation)
- 5-Tone and DTMF encoder/decoder (Analog mode)
- Normal and priority scan
- Convenient key assign stickers supplied
- Beat cancel capability
- Low voltage alert (Analog mode)
Repeater ICOM IC-FR5200H Rear panel view
- IDAS and IDAS logo are trademarks of Icom Incorporated.
- All other trademarks are the properties of their respective holders.
General
|
IC-FR5200H |
IC-FR6200H |
||
|---|---|---|---|
| Frequency coverage | 136–174MHz | 400–470, 450–512, 450–520, 350–400* MHz (* Non-FCC) |
|
| Number of channels | Max. 32 channels | ||
| Channel spacing | 6.25/12.5/25kHz* | ||
| Type of emission | 16K0F3E, 11K0F3E/F7E/F7D/F7W, 4K00F1E/F1D/F3E |
||
| Frequency stability | ±0.5ppm | ||
| Antenna impedance | 50Ω (Type-N × 2) | ||
| Operating temperature range | −30°C to +60°C; −22°F to +140°F | ||
| Power supply voltage | 13.6V DC | ||
| Current drain (at 13.6V DC) | TX 50W | 11A | |
| RX Max. audio | 1.2A | ||
| Stand-by | 550mA/450mA typ. (with/without UC-FR5000 at LCD backlight OFF) | ||
| Dimensions (W×H×D) | 483×88×360 mm ; 19.02×3.46×14.17 in | ||
| Weight | 10kg ; 22lb (approx.) | ||
| * | 25kHz bandwidth is no longer available for FCC Part 90 licensees for USA versions.Ask your dealer if you need 25kHz bandwidth. |
Transmitter
|
IC-FR5200H |
IC-FR6200H |
||
|---|---|---|---|
| Output power 100% duty cycle |
50W (adjustable to 5W) 50W (at 20–35°C, 24 hours) |
||
| Max. frequency deviation | ±5.0kHz/±2.5kHz (W/N) | ||
| Spurious emissions | 80dB typ. | ||
| FM hum and noise | 52/49dB typ. (W/N) | 50/45dB typ. (W/N) | |
| Audio harmonic distortion | 1% typ. (40% deviation) | ||
| Digital FSK error | 5% Max. | ||
| Microphone impedance | 600Ω (8-pin modular) | ||
Receiver
IC-FR5200H
|
IC-FR6200H
|
||
|---|---|---|---|
| Sensitivity | 12dB SINAD | 0.30μV typ. | 0.25μV typ. |
| 5% BER | 0.25μV typ. | 0.25μV typ. | |
| Adjacent channel selectivity | 85/56dB typ. (W/N) 68dB typ. (Digital) |
78/56dB typ. (W/N) 63dB typ. (Digital) |
|
| Spurious response | 80dB (W/N) 75dBμV emf (Digital) |
80dB (W/N) 80dBμV emf (Digital) |
|
| Intermodulation rejection | 78dB typ. (W/N) 75dBμV typ. emf (Digital) |
78dB typ. (W/N) 75dBμV typ. emf (Digital) |
|
| Hum and noise ratio | 52/50/66dB typ. (W/N/D) | 50/45/55dB typ. (W/N/D) | |
| Audio output power | 4.0W typ. at 5% distortion with a 4Ω load | ||
| External speaker connector | 2-conductor 3.5 (d) mm (1/8″)/4Ω | ||
Applicable U.S. Military Specifications
Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.
| Standard | MIL-810 G Method, Proc. |
|---|---|
| Low Temperature Storage |
500.5 I
|
| Low Temperature Operation |
500.5 II
|
| High Temperature Storage |
501.5 I
|
| High Temperature Operation |
501.5 II
|
| Low Temperature Storage |
502.5 I
|
| Low Temperature Operation |
502.5 II
|
| Temperature Shock |
503.5 I-C
|
| Humidity |
507.5 II
|
| Vibration |
514.6 I
|
| Shock Functional |
516.6 I
|
Also meets equivalent MIL-STD-810 -C, -D, -E and -F.
All stated specifications are subject to change without notice or obligation.
Optional :
HAND MICROPHONE
HM-152 |
DESKTOP MICROPHONE ICOM IC-FR5200H
 SM-26 |
EXTERNAL SPEAKERS ICOM IC-FR5200H
 SP-35 2m cable |
 SP-35L 6m cable |
Reviews
There are no reviews yet.